I think all is working again now. Please leave a comment on a photo somewhere if something you need is not working still.

Main Menu Home About Browse images Signup Lost password? News Links Help User Login User Name Password View By Hangar View By Aircraft Herr Engineering HRR 105, Fokker D-7 View Details View All Switch Aircraft Users Aircraft LASTWOODSMAN

Herr Engineering HRR 105, Fokker D-7 by LASTWOODSMAN. Viewed 498 times. Build Thread Next Prev Click image to return. Image Comments LASTWOODSMAN 02-Oct-17 15:37 The six inner bolt circle holes were enlarged to the larger, brass-coated, Escutcheon pin shaft diameter (head = 3.0 mm diam , shaft = 0.050" diam), and the six outer circle holes were already enlarged just larger than the smaller, shiny steel, Dressmaker Pin shaft diameter (head = 1.5 mm diam , and shaft = 0.0235" diam). I then stuck all those pins into the new hub holes to check the fit and look. At the left, there are 4 small brass washers on the prop shaft between the new removeable prop block and the propeller. You can also see a 90 degree bend of 6mm, that I put into the front of the wire prop shaft. The old nose block with thrust button, and the old practise hub, are at the end of the wooden dowel. LASTWOODSMAN 02-Oct-17 16:09 Oh - I forgot - I used a steel rule and exacto knife and a cutting board to cut the hub plate circle out of the over size balsa plate, as close as I could, and just sanded up the points on the edges with a sanding block, up to and even with, the round edge of the chrome outer circle. Please sign in to comment on this image.