I think all is working again now. Please leave a comment on a photo somewhere if something you need is not working still.

Main Menu Home About Browse images Signup Lost password? News Links Help User Login User Name Password View By Hangar View By Aircraft Dumas Kit #1803, Pietenpol Air Camper View Details View All Switch Aircraft Users Aircraft BillParker dreamer jgood LASTWOODSMAN patdaily

Dumas Kit #1803, Pietenpol Air Camper by LASTWOODSMAN. Viewed 340 times. Build Thread Next Prev Click image to return. Image Comments LASTWOODSMAN 20-Jul-17 12:44 Back in my balsa dust-filled apartment woodshop, I ended up sticking about one gram of modeling clay under the fuse rear end, and around the wire skid (for a tail wheel), and balanced it out perfectly. The total weight was now 26 grams, including 2 grams of two strands of 1/8" rubber , each strand of rubber 12" long (the prop hook to rear motor peg mount was 6 1/2" ), and including the one gram of ballast modeling clay. I then went back out to the Cricket Wicket, and I was only lucky enough to get a 12 second flight, because it was climbing too much and was "porpoising" too much. Then I followed the fantastic Dumas instruction segment for flight trimming, titled "FLYING THE MODEL" ( I had photocopied the page, highlighted the important sections, and brought it with me), and then "added down thrust by placing a small balsa shim behind the cowl at the top". I had also brought a sanding block, a permanent marker, scissors, and a small piece of 1/16" balsa plate. I sanded it to a sharp acute angle, traced the edge of the top half of the male (tenon) nose block {that plugs into the female (mortise) hole in the forward fuse bulkhead former}, cut it out with scissors, and stuck it behind the nose block at the top, after winding with a 15:1 winder, and a winding stooge. Please sign in to comment on this image.