Hangar |
Aircraft |
Category |
Date |
Preview |
Skyediamonds1985 | Guillows Series 800 - Stearman PT-17 | Build | 06-Jul-15 20:11 | | Views : 904 | Next, I went to the local fabric store and obtained a "sample" of very fine screen cloth. Window screen can be used, but for this scale, it would be too thick. |
Skyediamonds1985 | Guillows Series 800 - Stearman PT-17 | Build | 06-Jul-15 20:08 | | Views : 688 | Now, bear with me on this, and humor me a bit. I took what's left of the same sheet of plain white paper used for making the thin metal strips and painted it flat black. |
|
Hangar |
Aircraft |
Category |
Date |
Preview |
Skyediamonds1985 | Guillows Series 800 - Stearman PT-17 | Build | 06-Jul-15 20:04 | | Views : 587 | This is where individual choice comes in. One could purposely make the original black strips longer and end at the trailing edge of the wing. Or, for a bit of (ahem) finesse, could add just a bit more detail for (Sorry, here's that darn word again), "bling." |
Skyediamonds1985 | Guillows Series 800 - Stearman PT-17 | Build | 06-Jul-15 20:01 | | Views : 566 | As you can easily surmise, this is kind of a two-step process. Prior to gluing the first strip, I cut the end at 45 degrees, using the scientific eyeball method. Then with the remaining edge from the strip already cut at the same angle, I carefully lined it up to verify the joint before cutting the short strip to size and then sjupergluing it into place. I carefully placed a dab of the glue along the underside of the strip prior to attaching it to the surface. I admit this method requires one to "get it right the first time or else" but figured it was worth the risk. I figured if I used white glue, it would act as a small bit of "lubricant" allowing the strip to slide around and thereby leaving a thin film of glue. |
|